Permatex MotoSeal 1 Ultimate Gasket Maker Grey
Permatex MotoSeal 1 Ultimate Gasket Maker GreyFor two and four cycle engines. Solvent-based bond fully seals within 20 minutes. Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces. Resists gasoline and other damaging fluids. Withstands temperatures 350°F (177°C) continuous, 400°F (204°C) intermittent.
Automobile
Suggested Applications: Transmission case halves, valve covers, center and end covers (transmissions), crank case halves, cam covers, timing chain cases, primary drives, side covers, and clutch housings.
Motorcycle
Suggested Applications: Case halves, carburetor gaskets
Permatex Muffler & Tailpipe Bandage
Permatex Muffler & Tailpipe BandageEpoxy-impregnated fiberglass bandage chemically welds mufflers and tailpipes. Permanently repairs holes and leaks in exhaust systems saving costly part replacement. Seals out poisonous fumes to temperatures of 800°F (426?C).
Automobile
Suggested Applications: Mufflers and tailpipes on automobiles, trucks, tractors and farm equipment.
Permatex Muffler & Tailpipe Putty
Permatex Muffler & Tailpipe PuttyPermanently repairs holes and leaks in exhaust systems. Seals out fumes at temperatures up to 2000°F (1000°C). Safe for catalytic converters. 2-pouch bonus pack.
Automobile
Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
PERMATEX NICKEL ANTI-SEIZE Lubricant (77164) – 454 g
PERMATEX NICKEL ANTI-SEIZE Lubricant (77164) – 454 g
Permatex Non-Chlorinated Brake & Parts Cleaner
Permatex Non-Chlorinated Brake & Parts CleanerPenetrates, dissolves and removes dirt and oil from brake systems and metal parts. Safer for aluminum. Leaves no contaminant-attracting residue or chlorinated solvent run-off. Helps manage EPA halide limits.
Automobile
Suggested Applications: All brake systems, C.V. joints, machinery, tools, and farm equipment.
Permatex OPTIMUM BLACK Gasket Maker
Permatex OPTIMUM BLACK Gasket MakerOPTIMUM BLACK combines maximum oil resistance with maximum flexibility. Today, we see components changing and unlike materials meeting (plastic/steel, aluminum/steel, etc.), all with different rates of expansion and contraction. In addition, with technology advancing, regulations and requirements tightening, we see thinner metals, fewer fasteners, and wider spread bolt patterns. The strength and flexibility of OPTIMUM BLACK handle the changes and added stresses that exist between today’s lightweight, high performance, and premium component assemblies. OPTIMUM BLACK is sensor safe, low odor, and non-corrosive with resistance to oil, shop fluids, and vibration. It is one of the most advanced, maximum flex, maximum oil resistant RTV silicone gasket makers available.
- Maximum Flexibility: assemblies where dissimilar metals meet
- Maximum Oil Resistance
- High Temperature performance up to 500°F
- Sensor-Safe, Low Odor, Non-Corrosive
OPTIMUM BLACK Suggested Applications:
Oil Pans, Timing Cover, Transmission, Differential Cover
Permatex OPTIMUM GREY Gasket Maker
Permatex OPTIMUM GREY Gasket MakerOPTIMUM GREY combines maximum rigidity and maximum torque load and vibration resistance with extreme temperature resistance: -65°F to 700°F (-54°C to 371°C) intermittent, expanding uses and applications. Designed for max performance applications common in import & late model engines and component upgrades. It is sensor safe, low odor, and non-corrosive. The maximum rigidity and maximum torque load feature combination joined with outstanding resistance to oils, coolant, and shop fluids make OPTIMUM GREY one of the most versatile gasket makers available.
- Maximum Rigidity
- Maximum Torque Load & Vibration Resistance
- Sensor-Safe, Low Odor, Non-Corrosive
- High Temperature performance up to 700°F
OPTIMUM GREY Suggested Applications:
Valve Cover, Water Pump, Intake Manifold End Seals, Thermostat Housings
Permatex Permanent Strength Threadlocker RED
Permatex Permanent Strength Threadlocker REDOEM specified. A permanent, high strength product that is applied to fasteners 3/8″ to 1″ (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Conforms to ASTM D5363 AN0331 (Mil-S-46163A, Type II, Grade O).
Automobile
Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts
Permatex PermaShield Fuel Resistant Gasket Dressing & Flange Sealant
Permatex PermaShield Fuel Resistant Gasket Dressing & Flange SealantSpecially formulated for superior fluid resistance, this polyester urethane based gasketing compound withstands extreme temperature changes without hardening. Its non-setting, non-hardening character remains tacky even with rapid changes in temperature, enabling repeated assembly and disassembly of parts. Suitable as either a gasket maker or dressing, PermaShield™ seals surface imperfections between metal parts and is ideal in high performance applications. With an operating temperature range of -60° to 500°F (-50° to 260°C), this compound resists common engine fluids, including oil, gasoline, ethanol, water and anti-freeze and prevents contamination from moisture and dust.
Automobile
Suggested Applications: Axle assemblies, hydraulic parts, differential covers, oil pans (cast), water pumps, bearing caps/brackets, gearboxes, hydraulic equipment covers, intake manifold gaskets, and valve cover gaskets.
Permatex Pipe Joint Compound, 479ml
Permatex Pipe Joint Compound, 479mlPRODUCT DESCRIPTION S.I.N.: 834-300 Permatex
Pipe Joint Compound is a black, viscous, brushable liquid sealant and lubricant designed to help assemble and seal threaded joints on water, steam, oil and fuel lines.
Permatex Plastic Tank Repair Kit
Permatex Plastic Tank Repair KitComplete kit contains everything required for making professional-quality permanent repairs in just minutes. State-of-the-art components and easy-to-follow instructions with photographs. Repairs all types of plastic tanks. The repair resin is designed to harden within 8 10 minutes and cures in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs cracks up to 4 inches in length and holes up to 3/8 inch in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
Automobile
Suggested Applications: Ideal for cars, trucks, boats and RV’s; windshield washer reservoirs, radiator overflow tanks, coolant reservoirs, water tanks, and waste tanks.
Permatex Pneumatic/Hydraulic Sealant
Permatex Pneumatic/Hydraulic SealantOEM specified. Designed for locking and sealing high pressure hydraulic and pneumatic systems. Contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on “as received” fasteners and controlled locking strength affords easy disassembly.
Automobile
Suggested Applications: Hydraulic line fittings, brake fittings, transmission fluid fittings, and PTO fittings.
Permatex Professional StrengthRearview Mirror Adhesive
Permatex Professional StrengthRearview Mirror AdhesiveApproved and used by GM, Ford and Chrysler. Permanently remounts mirrors to windshields. Achieves handling strength in seconds; mirror-mounting strength in 15 minutes. Available in single and multi-applications. ODC-free. NOT DESIGNED FOR PLASTIC BUTTONS.
Automobile
Suggested Applications: Mounting rearview mirrors to windshields.
Permatex Prussian Blue, 22ml
Permatex Prussian Blue, 22ml
Permatex Rearview Mirror Adhesive Kit
Permatex Rearview Mirror Adhesive KitOEM approved. Complete kit contains everything required for making professional quality repairs in just minutes. State-of the- art components and easy-to-follow instructions with photographs. Two part adhesive that permanently bonds mirror buttons to windshields. Achieves handling strength in seconds, and mirror mounting strength in 30 minutes. ODC free. NOT designed for PLASTIC buttons.
Automobile
Suggested Applications: All foreign and domestic metal rearview mirror mounting buttons.
