PERMATEX
Permatex Fuel Tank and Radiator Repair Kit
Permatex Fuel Tank and Radiator Repair KitA two-component stick that when kneaded together, it can seal holes, seams or cracks on metal tanks, radiators or gas cans. It provides excellent chemical and moisture resistance and is non-flammable.
Automobile
Suggested Applications: Fuel tank, metal tanks, and radiators. Not recommended for use on PLASTIC gas tanks.
Permatex Fuel Tank Repair
Permatex Fuel Tank RepairA two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing. The resulting cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.
Automobile
Suggested Applications: Gas tanks and gas cans.
Permatex Fuel Tank Repair Kit
Permatex Fuel Tank Repair KitEliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4” (10cm) long and holes up to 3/8” (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. The repair resin is designed to harden within 8 10 minutes and cures in 30 minutes. Repairs can be made ideally at temperatures from 50°F to 75°F (10°C to 24°C). Repairs made at lower temperatures will take longer to cure. Repairs can be made on slow leaking cracks up to 4 inches in length and holes up to 3/8 inch in diameter. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
Permatex Gasket Remover – Low VOC Formula
Permatex Gasket Remover – Low VOC FormulaThis low VOC formulation combines powerful gasket remover strength with an innovative delivery system. Its fast-foaming action penetrates the most stubborn or baked-on gaskets in 15-20 minutes. The built-in brush-tip was designed for easy application and allows for scrubbing on intricate surfaces. This product is NOT recommended for use on silicone gaskets.
Automobile
Suggested Applications: Removes solvent-based gasketing and gasket sealant products including all Permatex Form-A-Gasket , Spray-A-Gasket, Indian Head, High Tack Gasket Sealants and Dressings, and residual gasket material.
Heavy Duty
Suggested Applications: Engine valve connectors, oil pan covers
Permatex Gear Oil RTV Gasket Maker
Permatex Gear Oil RTV Gasket MakerOEM specified. Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets.
Automobile
Suggested Applications: Differentials and transfer cases.
Permatex Grease Grabber Coconut Hand Cleaner
Permatex Grease Grabber Coconut Hand CleanerA powerful paste-style hand cleaner formulated with dirt busting “poly” scrubbers that dig out and mop up tough soils. Choose from fresh smelling lemon lime or coconut scents to tackle your dirtiest jobs. It fights foul odors including fuel, oil, lubricant, grease, and much more! Grease Grabber® contains no harsh solvents and is fortified with soothing emollients to keep hard-working hands soft, moisturized, and healthy. Just add a small amount of water to about a tablespoon of Grease Grabber® – a little goes a long way! Pennies per wash economy when dispensed through Poly 500™ Revolution Dispenser.
Automobile
Suggested Applications: Removes Dirt, Grease, Oil, Adhesives, Paint, Hydraulic Fluids, and more!
Permatex Heavy Duty Radiator Cleaner
Permatex Heavy Duty Radiator CleanerRemoves rust and scale from automotive engines, radiators and water jackets. Cleans and unclogs steam cleaner coils and boiler tubes. Not for use in aluminum radiators.
Automobile
Suggested Applications: Radiators, water jackets, industrial and maintenance applications.
Permatex High Performance Thread Sealant
Permatex High Performance Thread SealantOEM specified. Formulated specifically for metal, tapered pipe thread fittings, it replaces Teflon® tape and pipe dopes. Cures rapidly to withstand up to 10,000 PSI. Prevents galling and protects mated threaded areas from rust and corrosion. Contains PTFE.
Automobile
Suggested Applications: Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, and fuel fittings.
Motorcycle
Suggested Applications: Timing hole plug, oil hose fitting
Heavy Duty
Suggested Applications: Drain plugs, all tapered fittings
Permatex High Strength Threadlocker RED Gel
Permatex High Strength Threadlocker RED GelOEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in four convenient sizes, the 10G GEL TWIST™ pin-point applicator, the 5G GEL SQUEEZE™ applicator, the Professional Size 35G GEL TUBE, or the single-use pouch puts the Threadlocker right where you want it…on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).
Automobile
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
Heavy Duty
Suggested Applications: Cap screws and mounting studs on differentials
Permatex High Tack Gasket Sealant
Permatex High Tack Gasket SealantFast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.
Automobile
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber.
Permatex High Tack Spray-A-Gasket Sealant
Permatex High Tack Spray-A-Gasket SealantFast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane. Aerosol
Automobile
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket® seals all felt, cork, metal, paper, and rubber
Motorcycle
Suggested Applications: Clutch release cover, cylinder head gaskets
Permatex High Temp Epoxy – 56g
Permatex High Temp Epoxy – 56gA two part, hand kneadable, putty type industrial strength Titanium-reinforced epoxy in stick form which is used to bond and repair metallic materials that will be exposed to high temperatures. Contrasting brown and white colored materials are mixed together to form a uniform golden brown titanium color to indicate thorough mixing. After 8 hours, High Temp™ can be drilled, sanded, threaded, machined or painted and it is resistant to water and most solvents. Permatex® High Temp™ does not bond to polyethylene and polypropylene and it is not intended for structural applications.
Permatex High Temperature Anaerobic Flange Sealant
Permatex High Temperature Anaerobic Flange SealantA high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.
Automobile
Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.
Permatex High Temperature Sleeve Retainer
Permatex High Temperature Sleeve RetainerOEM specified. High temperature, up to 400ºF (204ºC), anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion. Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type II).
Automobile
Suggested Applications: Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, and liner assemblies
Motorcycle
Suggested Applications: Valve guides
Heavy Duty
Suggested Applications: Retaining bushings, cup plugs, gears, dowel pins, oil seals, ring gear bolts, differential lock pinswheel bearins, idler shafts, press fit bearings
Permatex High Temperature Thread Sealant
Permatex High Temperature Thread SealantOEM specified. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Wont shred or wear like Teflon® tape. Parts may be repositioned up to 4 hours after application. Temperature range -65°F to 400°F (-54°C to 204°C). Contains PTFE.
Automobile
Suggested Applications: Head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake, and power steering fittings
Heavy Duty
Suggested Applications: Differential drain plugs and core plugs. Pipe, water jacket, oil gallery plugs, oil pressure & temperature sensors, air conditioning fittings, hydraulic fittings, vacuum line connectiors, air brake fitting
