ADHESIVES
Permatex High Strength Threadlocker RED Gel
Permatex High Strength Threadlocker RED GelOEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in four convenient sizes, the 10G GEL TWIST™ pin-point applicator, the 5G GEL SQUEEZE™ applicator, the Professional Size 35G GEL TUBE, or the single-use pouch puts the Threadlocker right where you want it…on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).
Automobile
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
Heavy Duty
Suggested Applications: Cap screws and mounting studs on differentials
Permatex High Temp Epoxy – 56g
Permatex High Temp Epoxy – 56gA two part, hand kneadable, putty type industrial strength Titanium-reinforced epoxy in stick form which is used to bond and repair metallic materials that will be exposed to high temperatures. Contrasting brown and white colored materials are mixed together to form a uniform golden brown titanium color to indicate thorough mixing. After 8 hours, High Temp™ can be drilled, sanded, threaded, machined or painted and it is resistant to water and most solvents. Permatex® High Temp™ does not bond to polyethylene and polypropylene and it is not intended for structural applications.
Permatex High Temperature Anaerobic Flange Sealant
Permatex High Temperature Anaerobic Flange SealantA high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.
Automobile
Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.
Permatex High Temperature Sleeve Retainer
Permatex High Temperature Sleeve RetainerOEM specified. High temperature, up to 400ºF (204ºC), anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion. Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type II).
Automobile
Suggested Applications: Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, and liner assemblies
Motorcycle
Suggested Applications: Valve guides
Heavy Duty
Suggested Applications: Retaining bushings, cup plugs, gears, dowel pins, oil seals, ring gear bolts, differential lock pinswheel bearins, idler shafts, press fit bearings
Permatex Large Diameter Threadlocker RED
Permatex Large Diameter Threadlocker REDOEM specified. A high strength adhesive for locking and sealing large bolts and stud 1″ (25mm+) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Conforms to ASTM D5363 AN0211 (Mil-S-46163A, Type I, Grade L).
Automobile
Suggested Applications: Frame brackets, suspension fasteners, shock absorber mounts, wheel studs.
Permatex Liquid Electrical Tape
Permatex Liquid Electrical TapeWeatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals, moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing cant get to.
Suggested Applications: Ignition wires, underground wiring, outdoor lighting fixtures, bilge pumps, terminal blocks, and exposed wires.
Permatex Liquid Metal Filler
Permatex Liquid Metal FillerEasy-to-use filler can be drilled, filed, sanded and painted. Forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete. Excellent adhesion to galvanized metal. Repairs cracks or porosity leaks in cast metal parts. Fills small holes, cracks, and perforations. Resists water, oil and gasoline.
Suggested Applications: Oil pans, stake bed holes, door panels, and cast metal parts
Permatex Low Strength Threadlocker PURPLE
Permatex Low Strength Threadlocker PURPLEOEM specified. Low strength threadlocker designed for fasteners under 1/4″ (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Noncorrosive. Conforms to ASTM D 5363 AN0311 (Mil-S-46163A, Type II, Grade M).
Automobile
Suggested Applications: Carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners, and fine threads
Motorcycle
Suggested Applications: All small diameter (under 1/4″) exterior bolts
PERMATEX Maximum Temperature Bearing Mount- 50 ml
PERMATEX Maximum Temperature Bearing Mount- 50 ml
Permatex Medium Strength Threadlocker BLUE
Permatex Medium Strength Threadlocker BLUEOEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).
Automobile
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs
Motorcycle
Suggested Applications: Handlebar brackets, mirror fixtures, shock bolts, rear fender nuts, small fastener nuts
Heavy Duty
Suggested Applications: Case cover bolts, axle housing bolts, oil seal retainer bolts, axle shaft flange bolts, differential drain plugs, fuel tank fasteners, lug nuts, windshield wiper nuts, gear shift knobs, door hardware, running light screws, horning mounting
Marine
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts,
rocker arm adjustment nuts, carburetor studs
Permatex Medium Strength Threadlocker BLUE Gel
Permatex Medium Strength Threadlocker BLUE GelOEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in four convenient sizes, the 10G GEL TWIST™ pin-point applicator, the 5G GEL SQUEEZE™ applicator, the Professional size 35G GEL TUBE, or the single-use pouch puts the Threadlocker right where you want it…on the part! All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).
Permatex Muffler & Tailpipe Bandage
Permatex Muffler & Tailpipe BandageEpoxy-impregnated fiberglass bandage chemically welds mufflers and tailpipes. Permanently repairs holes and leaks in exhaust systems saving costly part replacement. Seals out poisonous fumes to temperatures of 800°F (426?C).
Automobile
Suggested Applications: Mufflers and tailpipes on automobiles, trucks, tractors and farm equipment.
Permatex Muffler & Tailpipe Putty
Permatex Muffler & Tailpipe PuttyPermanently repairs holes and leaks in exhaust systems. Seals out fumes at temperatures up to 2000°F (1000°C). Safe for catalytic converters. 2-pouch bonus pack.
Automobile
Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
Permatex Permanent Strength Threadlocker RED
Permatex Permanent Strength Threadlocker REDOEM specified. A permanent, high strength product that is applied to fasteners 3/8″ to 1″ (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Conforms to ASTM D5363 AN0331 (Mil-S-46163A, Type II, Grade O).
Automobile
Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts
Permatex Professional StrengthRearview Mirror Adhesive
Permatex Professional StrengthRearview Mirror AdhesiveApproved and used by GM, Ford and Chrysler. Permanently remounts mirrors to windshields. Achieves handling strength in seconds; mirror-mounting strength in 15 minutes. Available in single and multi-applications. ODC-free. NOT DESIGNED FOR PLASTIC BUTTONS.
Automobile
Suggested Applications: Mounting rearview mirrors to windshields.
