AMBERSIL AMBERGREASE SV100 ELECTRIC VARNISH – 400 ML
AMBERSIL AMBERGREASE SV100 ELECTRIC VARNISH – 400 MLElectric Spray Varnish provides a tough, impervious insulating seal – ideal for components subjected to ’difficult’ environments and high humidity.
AMBERSIL CHAIN LUBE FG AEROSOL, 400ML
AMBERSIL CHAIN LUBE FG AEROSOL, 400MLCHAIN LUBE FG is a foaming chain lubricant with added PTFE. A high performance chain and conveyor lubricant based on stable vegetable oils and PTFE. Chain Lube is specifically designed to provide convenient, effective lubrication and protection in applications where incidental food contact may occur or in applications where a clean lubricant is preferred. The gentle foaming action assures an excellent penetration and prevents against dripping.
AMBERSIL CHAINSPRAY (chain and drive lubricant ) – 400 ml (Made in UK)
AMBERSIL CHAINSPRAY (chain and drive lubricant ) – 400 ml (Made in UK)Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off’ and dust absorption and can be applied to running chains. High temperature resistance up to 300°C. Meets military specifications – Def. Stan D/DQA/TS/CS/217/1. Pencil jet spray pattern to facilitate accurate application. Size: 400ml
Ambersil Copper Anti-Seize Lubricant, 500g
Ambersil Copper Anti-Seize Lubricant, 500gProtects against fretting, seizing and corrosion. Enables easy assembly and dismantling of threaded fasteners even after exposure to high temperatures, providing anti-seize protection to +1100°C.
Ambersil Corrosion Inhibitor, Aerosol, 400ml
Ambersil Corrosion Inhibitor, Aerosol, 400mlAMBERSIL CORROSION INHIBITOR is a protective coating that provides long lasting protection against rust and corrosion. Corrosion Inhibitor is designed to provide good short to medium term protection of metallic parts and components. Principally designed for indoor use, corrosion inhibitor will also provide a degree of short-term protection to components stored outdoors.
AMBERSIL DRY MOLY – 400 ml MADE IN UK
AMBERSIL DRY MOLY – 400 ml MADE IN UKAMBERSIL DRY MOLY is a resin bonded, high pressure resistant, dry film lubricant containing Molybdenum Disulphide for metal-to-metal lubrication where a wet film cannot be tolerated. Once applied, the MoS2lubricant prevents seizing, fretting, scuffing and reduces friction. The thin film also helps prevent corrosion and repels water.
AMBERSIL FLAW DETECTOR CLEANER, 400ml
AMBERSIL FLAW DETECTOR CLEANER, 400mlQuick drying solvent cleaner/degreaser and excess penetrant remover for the non-destructive testing of metal surfaces by liquid penetrant inspection. Many cracks in engineering materials can be deep in spite of having a very small opening width on the surface and can cause very serious defects. By normal visual inspection such cracks may be very difficult to detect, but penetrant flaw detection is an extension of the visual inspection method highlighting otherwise invisible defects. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
AMBERSIL FLAW DETECTOR Developer, 400ml
AMBERSIL FLAW DETECTOR Developer, 400mlFLAW DETECTORS comprise a 3 part system for quick and easy visual detection of flaws and cracks. Each set consists of a Cleaner, a Penetrant and a Developer which, when used together, help to identify problems immediately and reduce downtime.
AMBERSIL FLAW DETECTOR Penetrant, 400ml
AMBERSIL FLAW DETECTOR Penetrant, 400mlFLAW DETECTORS comprise a 3 part system for quick and easy visual detection of flaws and cracks. Each set consists of a Cleaner, a Penetrant and a Developer which, when used together, help to identify problems immediately and reduce downtime
AMBERSIL Gear & wire Rope Lube (heeavy duty lubricant ) – 400 ml (MADE IN UK)
AMBERSIL Gear & wire Rope Lube (heeavy duty lubricant ) – 400 ml (MADE IN UK)GEAR AND WIRE ROPE LUBRICANT is formulated to provide protection and lubrication for open gears and wire ropes under all operating conditions.
Ambersil Industrial Degreaser FG 500ml
Ambersil Industrial Degreaser FG 500mlAMBERSIL INDUSTRIAL DEGREASER FG is an innovative solvent blend that is excellent for use where rapid turnaround is necessary and low flash point solvents can be used. Dissolves and removes greases, oils, lubricants, adhesives and contaminants from equipment, machinery, motors and metal parts. · NSF A8 and K1 registered (N° 140255 and 140250) for use in food industry · Cuts through dirt and grease · Fast evaporation to minimise downtime, leaves no residues · Easy “in place” cleaning with minimal odour · Non-corrosive and non-staining · Safe on most plastics, coatings and rubbers (always test prior to use) · Aerosol fitted with a 360O Spray System for all angle use, even upside down
Ambersil Mould Protective 400ml Aerosol
Ambersil Mould Protective 400ml AerosolMOULD PROTECTION has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage.
AMBERSIL SILICONE FG (NSF silicone lubricant ) – 400 ml (MADE IN UK
AMBERSIL SILICONE FG (NSF silicone lubricant ) – 400 ml (MADE IN UKUse where reduced friction is required, particularly on plastic-to-plastic components. Use on guide rails in finished product lines or as a guide rail and labelling equipment anti-stick treatment to dramatically reduce label and adhesive build-up.
AMBERSIL STAINLESS STEEL Cleaner FG (NSF) – 500 ml MADE IN UK
AMBERSIL STAINLESS STEEL Cleaner FG (NSF) – 500 ml MADE IN UKCLEANER FG is a highly effective precision cleaning solvent blend does not contain chlorinated solvents, alcohols or Glycol ethers. Contact Cleaner FG improves the performance and reliability of electrical/electronic equipment in the food industry by preventing contact failures or malfunctions by dissolving and rinsing away contaminants which may hold moisture and cause corrosion or arcing.
AMBERSIL TUFCUT (metal cutting compound ) – 400 ML (MADE IN UK)
AMBERSIL TUFCUT (metal cutting compound ) – 400 ML (MADE IN UK)The TUFCUT range is comprised of specialist metal cutting lubricants based on a mixture of extreme pressure additives and anti-oxidants. They have been formulated
