BRANDS
CRC Industrial Degreaser – 500 ml
CRC Industrial Degreaser – 500 mlHeavy duty cleaner and degreaser for mechanical equipment. Heavy duty non-chlorinated cleaner Degreases, removes oil, grease, wax, dirt and other contaminants .With the 360° (upside-down) spray valve and extension tube
CRC LECTRA CLEAN – 400ML
CRC LECTRA CLEAN – 400MLCRC Lectra Clean is a non-flammable heavy-duty evaporating cleaner and degreaser for use on electric motors and other heavy-duty electrical andmechanical equipment. The stabilised fast-acting solvent blend effectively removes wax, grease, oil, dirt, moisture and foreign matter that are common causes of current leakages and electric inefficiencies.
CRC LECTRA CLEAN II
CRC LECTRA CLEAN IICRC Lectra Clean II is a versatile, non-chlorinated, non-conductive, zero VOC and non-corrosive heavy duty degreaser intended for use on electric motors and other electrical equipment. Lectra Clean® II will remove heavy deposits of wax, dust, oil, tar, ink, grease and carbon dust from metal, plastic and nylon surfaces. Additionally,
CRC LECTRA CLEAN II – 20 L
CRC LECTRA CLEAN II – 20 LCRC Lectra Clean® II is a versatile, non-chlorinated, non-conductive, zero VOC and non-corrosive heavy duty degreaser intended for use on electric motors and other electrical equipment. Lectra Clean® II will remove heavy deposits of wax, dust, oil, tar, ink, grease and carbon dust from metal, plastic and nylon surfaces. Additionally, Lectra Clean® II’s controlled evaporation enhances its strong cleaning action. It provides an excellent alternative to chlorinated solvents for cleaning applications where chlorinated solvents are not acceptable.
CRC LECTRA CLEAN II – 5 L
CRC LECTRA CLEAN II – 5 LCRC Lectra Clean® II is a versatile, non-chlorinated, non-conductive, zero VOC and non-corrosive heavy duty degreaser intended for use on electric motors and other electrical equipment. Lectra Clean® II will remove heavy deposits of wax, dust, oil, tar, ink, grease and carbon dust from metal, plastic and nylon surfaces. Additionally,
CRC RUST REMOVER
CRC RUST REMOVERCRC Rust Remover is a safe, effective, fast acting formula. Removes rust, not metal. CRC Rust Remover leaves metal clean and ready to paint, plate or powder coat. No heavy wire brushing or sand blasting required. CRC Rust Remover removes only the rust and will not damage metal surfaces.
CRC Urethane Isolation (Industrial) RED – 300 ml
CRC Urethane Isolation (Industrial) RED – 300 mlCRC Urethane Coats provides an air curing conformal urethane type coating that insulates electrical electronic equipment, seals out water and moisture and acts as a barrier for contaminants.
Denso Tape – Made in UK
Denso Tape – Made in UKA cold applied tape which remains plastic over a wide temperature range. It is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases. For the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion. Waterproofing of cables and thermal insulation.
DEVCON 2 TON EPOXY CLEAR – 25 ML
DEVCON 2 TON EPOXY CLEAR – 25 MLDevcon 2-Ton Epoxy is an extremely strong two-part epoxy which forms a powerful bond with ferrous and non-ferrous metals, ceramics, wood, concrete, or glass in any combination. Easy–flow syringe makes mixing easy and snap-open cap reseals for storage.
DEVCON ALUMINIUM PUTTY F – 500g
DEVCON ALUMINIUM PUTTY F – 500gAluminium filled epoxy putty for cost effective repairs to aluminium castings, components and equipment
DEVCON Plastic Steel 5 Minute Putty SF – 500 g
DEVCON Plastic Steel 5 Minute Putty SF – 500 gDevcon Plastic Steel 5 Minute Putty Restores worn on fatiqued metals; patches castings; makes jigs and fixtures; rebuilds pump and valve bodies; restores bearing journals and races, stop online Leakages in Transformers, Pipes, Radiators Etc. Bonds to aluminum, concrete, and many other metals
DEVCON Plastic Steel Putty (A) – SET 0.5 KG
DEVCON Plastic Steel Putty (A) – SET 0.5 KGPlastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
DEVCON STAINLESS STEEL PUTTY ST – 500g
DEVCON STAINLESS STEEL PUTTY ST – 500gStainless steel filled epoxy putty for patching, repairing and rebuilding stainless steel and non ferrous equipment . Recommended for use with patches, repairs and rebuilds stainless steel equipment in areas where welding is not practical or impossible, repairs cracks, dents and breaks in equipment, machinery or castings, rebuilds shafts, trays and chutes, used for repairs in dairies and food processing operations and chemical plants, certified for portable water applications, chemically accepted for use in USDA inspected plants. It is in the form of cream viscous liquid with amine odour.
DEVCON-Underwater Repair Putty (UW), 0.5kg
DEVCON-Underwater Repair Putty (UW), 0.5kg- Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics
- Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments
- Eliminates the need for substrate to be thoroughly dry before repair
- Non-rusting; easy-to-mix and apply
- Cures in temperatures as low as 40°F
- Listed under NSN Stock# 8010-01-120-8753
Dow Corning 732
Dow Corning 732- One-component adhesive/sealant
- Cures at room temperature when exposed to moisture in the air
- Acetoxy cure system
- Non-sag, paste consistency
- Easy to apply
- Cures to a tough, flexible rubber
- Good adhesion to many substrates
