LIQUI-MOLY
LIQUI-MOLY Cleaner and Thinner,1L(Made in Germany )
LIQUI-MOLY Cleaner and Thinner,1L(Made in Germany )Solvent-based product that can be used for all degreasing and cleaning work.
LIQUI-MOLY COPPER PASTE,250g (Made in Germany)
LIQUI-MOLY COPPER PASTE,250g (Made in Germany)Copper Paste is used for the highest temperatures in threaded connections and contact surfaces that are exposed to high pressures and corrosive influences such as compressor and turbine screws, exhaust bolts, sparkplug threads. Application range – 30 °C to + 1100 °C
Liqui-Moly Diesel Smoke Stop -150 ml (Made in Germany)
Liqui-Moly Diesel Smoke Stop -150 ml (Made in Germany)Accelerates soot burn-off and reduces exhaust smoke. Reduces emissions and odor nuisance. Completely effective right after adding. Cleans the diesel injection system and makes the engine run smooth. Optimizes the emission test values.
Liqui-Moly Engine Flush Plus, 300 ml (Made in Germany)
Liqui-Moly Engine Flush Plus, 300 ml (Made in Germany)Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended
LIQUI-MOLY Grinding and Polishing Paste, 300g (Made in Germany)
LIQUI-MOLY Grinding and Polishing Paste, 300g (Made in Germany)For effortlessly removing weathered and tarnished paint layers, course dirt, paint-spray mist, scratches and surface cracks. The areas treated with grinding paste can be painted without any additional treatment. Silicon-free. Suitable for polishing machines.
Liqui-Moly Hydraulic Lifter Additive – 300 ml (MADE IN GERMANY)
Liqui-Moly Hydraulic Lifter Additive – 300 ml (MADE IN GERMANY)High performance additive that damps down noise generation of contaminated and sticky hydraulic tappets. Cleans valve bores and thus ensures optimal functioning again
LIQUI-MOLY Hydraulic Oil HLP 68 – 20L (MADE IN GERMANY)
LIQUI-MOLY Hydraulic Oil HLP 68 – 20L (MADE IN GERMANY)Mineral hydraulic oil with the classification type HLP acc. to DIN 51524 Part 2. Contains select agents to improve the aging resistance in the wear and corrosion protection as well as the EP properties. Ideally suited in systems in which high thermal loads may arise.
LIQUI-MOLY Liquid Metal ,25ml (Made in Germany )
LIQUI-MOLY Liquid Metal ,25ml (Made in Germany )Fast-hardening 2-K epoxy glue with very high strength. After curing, the repaired spot can be further metal-removal machined, ground or over-coated.
LIQUI-MOLY Liquimate 2-Component Power Adhesive,25ml (Made in Germany )
LIQUI-MOLY Liquimate 2-Component Power Adhesive,25ml (Made in Germany )High-strength two-component methyl acrylate adhesive for long-lasting high-performance bonding of various materials (e.g. steel, aluminum, metals, heat-formable plastics, composite materials ABS, acrylics, PVC, GFRP, PC, PET, PU, etc.) to themselves and to each other. The rapid-hardening adhesive is extremely impact and peel-resistant and can be processed as required. Stable in the presence of gasoline, oil, mild acids and alkalis.
LIQUI-MOLY LIQUIMATE 8100 1K-PUR Grey,300ml
LIQUI-MOLY LIQUIMATE 8100 1K-PUR Grey,300mlA 1-component, paste-like polyurethane-based adhesive/sealant which is cross-linked (cured) by the moisture from the air to form a rubbery-elastic material. The skinning and curing times are both dependent on the humidity of the air and the temperature but the curing time is also dependent on the depth of the joint. These times can be shortened by raising the temperature and humidity. Low temperatures and humidities have a retarding effect.
Liqui-Moly Litho HT + MoS2
Liqui-Moly Litho HT + MoS2Litho HT + MoS2 is a work stable, water-resistant, oxidation and corrosion resistant, high-performance lithium-complex soap grease. It ensures a very high standard of wear protection and a high load carrying capacity. During operation, a permanently adhering, ultra-thin molybdenum disulfide film forms on the sliding points. This film retains its lubricating action for a long time even after the grease supply completely fails.
Liqui-Moly LM 47 Long-Life Grease + MoS2
Liqui-Moly LM 47 Long-Life Grease + MoS2High quality special grease. The MoS2 content provides the selected base grease with outstanding lubricity and high performance properties that normal grease simply does not have. During operation, a permanently adhering, ultra-thin molybdenum disulfide film forms on the sliding points. The film retains its lubricating action for a long time even after the grease supply completely fails. Extremely long lubricity, transportable in central lubrication systems. Designation acc DIN 51502 KPF2K-30. Service temperature: – 30 °C to + 120 °C. Intermittent up to +130 °C
Liqui-Moly LM 50 Litho HT
Liqui-Moly LM 50 Litho HTLM 50 Litho HT is a work stable, water-resistant, oxidation and corrosion resistant, high-performance lithium-complex soap grease. It ensures a very high standard of wear protection and a high load-carrying capacity.
Liqui-Moly Lubricant Fix, 50g (Made in Germany)
Liqui-Moly Lubricant Fix, 50g (Made in Germany)Lubricant Fix is an exceptionally adhesive, water resistant, special paste with a wide range of applications. It provides outstanding protection from wear, corrosion and oxidation and prevents creaking and squeaking.. Extremely adhesive, reduces friction, is resistant to hot water and seawater.
LIQUI-MOLY Maintance Spray,White-250ml (Made in Germany)
LIQUI-MOLY Maintance Spray,White-250ml (Made in Germany)Maintenance Spray as an adhering, water-resistant, white high-performance lubricant. Perfectly suited for lubricating all moving parts. It is extremely adhesive, provides reliable corrosion protection and is age and squeeze-stable. Guarantees long-term lubrication security. It is used wherever conventional lubricants cannot be used for reasons of ”cleanliness”. Excellent low and high temperature properties.
