Threadlockers
Bondloc B243 Oil Tolerant Threadlock – Made in UK
Bondloc B243 Oil Tolerant Threadlock – Made in UKB243 is an anaerobic formulation designed to be used on parts in an “as received” condition, such as those with protective films (oils) etc.
Bondloc B270 Studlock, 25ml – Made in UK
Bondloc B270 Studlock, 25ml – Made in UKB270 Studlocker is a permanent Green coloured general purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1”, sealing against leakage and corrosion. It is chemical resistant, resisting fuels, lubricants and most industrial liquids and gases.
BondLoc Thread Lock & Seal B242 – Made in UK
BondLoc Thread Lock & Seal B242 – Made in UKB242 Threadlocker and its variants are a general purpose Removable medium strength product. All removable Nut grades will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. B242 does not run off or drip and does not migrate after assembly. Once applied, parts slip together easily, lubricated by the adhesive.
Loctite 242
Loctite 242LOCTITE® 242® is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Suitable for applications on less active substrates such as plated surfaces, where disassembly with hand tools is required for servicing. The thixotropic nature of LOCTITE® 242 ® reduces the migration of liquid product after application to the substrate.
Mil-S-46163A LOCTITE® 242® is tested to the lot requirements of Military Specification Mil-S-46163A. Note: This is a regional approval. Please contact your local Technical Service Center for more informationandclarification. ASTMD5363 Each lot of adhesive produced in North America is tested to the general requirements defined in paragraphs 5.1.1 and 5.1.2andtothe DetailRequirements definedin section 5.2.
LOCTITE 243
LOCTITE 243LOCTITE® 243™ is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand toolsThe product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibrationThe thixotropic nature of LOCTITE® 243™ reduces the migration of liquid product after application to the substrateLOCTITE® 243™ provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfacesThe product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, suchascutting,lubrication,anti-corrosionandprotectionfluids
NSFInternational Registered to NSF Category P1 for use as a sealant where there is no possibilty of food contact in and around food processing areas. Note: This is a regional approval. Please contact your local Technical Service Center for more informationandclarification.
NSFInternational CertifiedtoANSI/NSFStandard61foruse in commercial and residential potable water systems not exceeding 82° C. Note: Thisisa regional approval. Please contact your local Technical ServiceCenterformoreinformationandclarification.
LOCTITE 262 THREADLOCKER- 50 ML
LOCTITE 262 THREADLOCKER- 50 MLLOCTITE 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners
LOCTITE 271-HIGH-STRENGTH THREADLOCKER, 50ML
LOCTITE 271-HIGH-STRENGTH THREADLOCKER, 50MLLOCTITE® 271™ Mil Spec Low Viscosity High Strength, Red Threadlocker for fasteners up to 1″ (25 mm) in diameter. Mil Spec: Mil-S-46163A Type I Grade K. ASTM-D5363: Group 2 Class 2 Grade 1.
LOCTITE-222 THREADLOCKER, 50 ML
LOCTITE-222 THREADLOCKER, 50 MLLOCTITE 222 Low Strength Purple Threadlocker is ideal for fastener diameters of 1/4″ (6mm) and smaller. Its controlled lubricity allows for accurate clamp loads. Parts can be separated using hand tools.
PERMA-LOCK BLUE THREADLOCKER
PERMA-LOCK BLUE THREADLOCKERJ-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools.
PERMA-LOCK PENETRATING THREADLOCKER
PERMA-LOCK PENETRATING THREADLOCKERJ-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. The perma-lock low viscosity green thread locker penetrates between part surfaces for a secure seal with no disassembly necessary. It can be applied to pre-assembled parts and is ideal for 1/2 inch to 2 inch fasteners.
PERMA-LOCK RED THREADLOCKER
PERMA-LOCK RED THREADLOCKERJ-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock High Strength Threadlocker is ideal for heavy-duty applications requiring resistance to severe shock and vibrations. Heating and hand tools are required to separate parts.
Permatex High Strength Threadlocker RED Gel
Permatex High Strength Threadlocker RED GelOEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in four convenient sizes, the 10G GEL TWIST™ pin-point applicator, the 5G GEL SQUEEZE™ applicator, the Professional Size 35G GEL TUBE, or the single-use pouch puts the Threadlocker right where you want it…on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).
Automobile
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
Heavy Duty
Suggested Applications: Cap screws and mounting studs on differentials
Permatex Large Diameter Threadlocker RED
Permatex Large Diameter Threadlocker REDOEM specified. A high strength adhesive for locking and sealing large bolts and stud 1″ (25mm+) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Conforms to ASTM D5363 AN0211 (Mil-S-46163A, Type I, Grade L).
Automobile
Suggested Applications: Frame brackets, suspension fasteners, shock absorber mounts, wheel studs.
Permatex Low Strength Threadlocker PURPLE
Permatex Low Strength Threadlocker PURPLEOEM specified. Low strength threadlocker designed for fasteners under 1/4″ (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Noncorrosive. Conforms to ASTM D 5363 AN0311 (Mil-S-46163A, Type II, Grade M).
Automobile
Suggested Applications: Carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners, and fine threads
Motorcycle
Suggested Applications: All small diameter (under 1/4″) exterior bolts
Permatex Medium Strength Threadlocker BLUE
Permatex Medium Strength Threadlocker BLUEOEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).
Automobile
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs
Motorcycle
Suggested Applications: Handlebar brackets, mirror fixtures, shock bolts, rear fender nuts, small fastener nuts
Heavy Duty
Suggested Applications: Case cover bolts, axle housing bolts, oil seal retainer bolts, axle shaft flange bolts, differential drain plugs, fuel tank fasteners, lug nuts, windshield wiper nuts, gear shift knobs, door hardware, running light screws, horning mounting
Marine
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts,
rocker arm adjustment nuts, carburetor studs
