Product Details
Weicon-Repair Stick Titanium
Description
- wear resistant
- titanium-filled
- high temperature resistant up to +280°C (+536°F)(briefly up to +300°C/+572°F)
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
Permatex’s Black Plastic Welder™ forms a tough durable bond to hard and semi-flexible plastics, aluminum, fiberglass and more. This structural adhesive designed for general purpose bonding of a wide variety of materials. Black in color, ideal for automotive trim, bumper and clip needs.
A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300°F intermittent. Over 3,000 PSI shear strength on steel.
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld™ sets to a hard, permanent bond.
KwikWeld™ Professional is a professional-sized version of our fast setting KwikWeld™ two-part epoxy cold weld system. It provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. KwikWeld™ cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300ºF.
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
Problem retrieving data from Twitter
Twitter error code: 215 - Bad Authentication data.
Please check the Twitter name in the widget or shortcode, Rotating Tweets settings or the Twitter API status.
Copyright © 2022 industrial-mall.com. All Rights Reserved.
Reviews
There are no reviews yet.