Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Product Details

PATTEX FT 101 SEAL-BOND-FILL -280 ml

  • All materials
  • Indoor & outdoor
  • 10 years warranty
  • Suitable for wet surface applications
  • High temperature resistance: -30°c to +90°c
  • UV resistant
  • Elongation > 400%
  • Gap bridging
  • No shrinkage
  • Overpaintable
  • Solvent free
Compare

Share this product

Description

Product features

  • All materials
  • Indoor & outdoor
  • 10 years warranty
  • Suitable for wet surface applications
  • High temperature resistance: -30°c to +90°c
  • UV resistant
  • Elongation > 400%
  • Gap bridging
  • No shrinkage
  • Overpaintable
  • Solvent free
Possible uses
  • Wood
  • Brick
  • Ceramic
  • Tile
  • Stone
  • Metal
  • Plastics
  • Glass
  • Mirrors

Tips & tricks:

  •  The toothpick trick: To avoid spreading glue around the surface when you glue it, put a toothpick into the glue strip and press firmly. The toothpick will keep the height you need and keep the glue from spreading.
  • Better control: If you’re using a cartridge, a good idea is to cut the nozzle with a triangular forcep, for a V-shaped edge to the nozzle. It makes it easier to control the flow of glue when you apply it.

 

Key Notes:

  • Allow glue crusts or dried-on glue residues to soak and swell for several days before removing them.
  • Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.

Surface preparation:

  • Before applying the glue,ensure the surfaces to be bonded are clean and free from dust, grease or oil.

Adhesive application:

  • Cut off the top of the cartridge.
  • Screw the nozzle on the cartridge. Cut the nozzle to desired size, about 6mm width. Insert the cartridge into the gun.

Final application:

  • Depending on the size and shape of the object you want to glue, apply beads or drops to the back of the object to be glued.
  • Use a wet sponge to easily wipe away any excess glue

Storage:

  • Store in a cool, dry and frost free place.
TECHNICAL DOCUMENTS
PATTEX FT 101 SEAL-BOND-FILL TDS

Reviews

There are no reviews yet.

Be the first to review “PATTEX FT 101 SEAL-BOND-FILL -280 ml”

Your email address will not be published.