Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Product Details

Permatex Disc Brake Quiet

Permatex Disc Brake Quiet

Stops brake squeal by dampening vibration at caliper/brake pad interface. Provides tighter fit and allows for easier disassembly. Protects against corrosion. Compatible with anti-lock brake systems. This product contains an elastomeric polymer for use with brake pads not having anti-squeal shims. Aerosol

Automobile

Suggested Applications: Automotive disc brakes, out board and inboard pads for disc braking systems, disc brake pads without anti-squeal shims.

Compare

Share this product

Description

PRODUCT DESCRIPTION
Permatex Disc Brake Quiet – Aerosol is specifically formulated
to eliminate disc brake squeal, which results from vibration
caused by friction forces in the braking system. The product
stops brake squeal and chatter by dampening vibration at the
caliper/brake pad interface. Provides a tighter fit and allows for
easier disassembly.
PRODUCT BENEFITS
Eliminates disc break chatter
Compatible with anti-lock systems
Allows for easier disassembly
Resists water and high temperatures
Allows for easier disassembly
TYPICAL APPLICATIONS
Can be used on all cars and truck with disc brakes
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. Remove the lug bolts holding the wheel assembly in
place.
3. Remove pins (or bolts) holding the caliper assembly, to
access pad assembly.
4. Remove dirt or grease from surface with Permatex
Brake & Parts Cleaner.
5. Shake can thoroughly until the ball agitator inside the can
is free. For best results, aerosol can should be at room
temperature before spraying.
6. Holding can 8 to 10 inches from the back side of the disc
pad, press the nozzle and apply a light even coat. Note:
Do not apply on the side which comes into contact with
the rotor.
7. For consistent coverage, apply one to two additional
coats.
8. Allow the product to dry a minimum of 10 minutes per
coat, then reassemble.
Note: Aerosol product will coat 10 to 12 sets of disc brakes, 3
coats per set.

For Cleanup
1. Turn can upside-down and spray to clear nozzle.
2. Clean hands with Permatex brand hand cleaners

TECHNICAL DOCUMENTS
Permatex Disc Brake Quiet Tds

Reviews

There are no reviews yet.

Be the first to review “Permatex Disc Brake Quiet”

Your email address will not be published.