HY-POXY STEELBOND STEEL PUTTY

Description

DESCRIPTION:

A two-component epoxy formula highly concentrated with carefully selected steel particles, modified curing agents and special high quality additives to provide maximum strength, durability, and ease of application. STEELBOND will adhere to vertical surfaces and can be machined with standard metalworking tools and equipment.

APPLICATIONS:

Universally used for repairing pipes, tanks, valves, pumps, engine blocks, water jackets, radiators, etc. STEELBOND is a non-shrinking, permanent metallic filler that is widely used for blow holes in castings, building up metal surfaces and for the repair of drill jigs and placement fixtures.

CURING TIME:

At 75°F (24°C) a ½” (12.5mm) layer of HY-POXY® STEELBOND® putty will be hard in approximately 4 hours. FULL cure times are as follows:

TEMPERATURE       WORKING TIME         FULL CURE TIME
60°F (16°C)               90 Minutes                      32 Hours
75°F (24°C)               45 Minutes                      16 Hours
90°F (32°C)               25 Minutes                       8 Hours

HY-POXY® STEELBOND® will not cure properly below 60°F (16°C).