Spray Nine Concrete Cleaner
Spray Nine Concrete Cleaner is a powerful alkaline detergent designed to cut through tough grease and oil on concrete. This heavy-duty detergent penetrates, emulsifies, and dissolves ground-in dirt, grease and grime that other solutions fail to remove. On top of it, the solution washes away easily with water making it perfect for concrete driveways, garage floors, machine shops, sidewalks and much more!
Spray Nine Concrete Cleaner is a powerful alkaline concrete
cleaner formulated to cut through heavy deposits and lift away
grease, grime and heavy ground-in dirt. It is ideal for garages,
workshops, driveways, and walkways. Safe for use on
traditional concrete surfaces, brick, stone, masonry, asphalt,
slate and sealed patterned/ stained concrete surfaces.
• Powerful cleaner for removing oil and grease from
• High sudsing properties
• Economical to use
• Easy clean-up with water
Problem grease/oil areas
DIRECTIONS FOR USE:
Always wear protective clothing to prevent eye and
For raw non-sealed and non-stained concrete:
Always test product in an inconspicuous area.
1. Loosen and remove any thick build-up of grease, oil
and dirt. 2. Wet area with water. Floor must be wet but
without puddles. 3. Sprinkle an even amount of
cleaner over wet area. 4. Allow 5 minutes of contact
time but DO NOT allow floor to dry. 5. Scrub area with a
stiff broom or brush until stains dissolve. 6. Rinse area
thoroughly and rinse any residue completely down
For sealed or decretive stained concrete:
Always test product in an inconspicuous area. 1.
Prewash area with water to loosen and remove any
build-up of debris, grease and dirt.
2. Dilute: 2oz of Spray Nine Garage Floor Cleaner in a
5-gallon (20 liter) bucket. 3. Wet area to be cleaned,
floor should be wet but without puddles.
4. With a stiff broom, mop diluted product onto
area to be cleaned and scrub until stains dissolve. Do
not let product sit or dry. 5. Rinse
area thoroughly right away and rinse any residue
completely down driveway.
NOTE: PAINTED AND STAINED CONCRETE MUST
BE PREVIOUSLY SEALED WITH A POLYURETHANE
OR EPOXY FINISH. ALWAYS RINSE THOROUGHLY,
RESIDUE MAY STAIN. AVOID PRODUCT CONTACT
WITH WINDOWS, MIRRORS AND SOFT METALS
|Spray Nine Concrete Cleaner Tds|