Description

PRODUCT DESCRIPTION
Permatex Ultra Bond Super Glue is a premium, faster
acting cyanoacrylate that provides a stronger, longer lasting
bond and works on more materials than regular super glues.
It is designed to meet the most demanding automotive
adhesive needs. Permatex Ultra Bond Super Glue works
on both porous and non-porous materials including metal,
most plastics, laminated plastics, vinyl, rubber, ceramics,
paper, wood, textiles, leather, synthetic leather, cork and
chipboard. It sets in seconds to form a strong, transparent
bond. Note: Permatex Ultra BondTM Super Glue will not
bond polyethylene and polypropylene plastics.
PRODUCT BENEFITS
• Ready to use
• Permanent, transparent bond
• Fills gaps to .004”
TYPICAL APPLICATIONS
• Automotive trim
• Logos
• Knobs
• Gear shift logos
• Minor interior repairs
DIRECTIONS FOR USE
1. Protect the work surface against accidental spills, as
cyanoacrylates can mark finishes and fabrics.
2. Clean and ensure a close fit on the surfaces to be
bonded. Wiping wood with a damp cloth will increase
bonding speed.
3. To use, simply remove the cap and Ultra Bond will
flow from the handy tip applicator when the sides of the
bottle are gently squeezed.
4. Apply the glue to one of the surfaces. Use sparingly,
one square inch of surface area requires only one drop
of glue.

5. Hold the surfaces to be bonded together for 15 to 30
seconds. No clamping is required, even on wood. DO
NOT REPOSITION THE PARTS.
6. Replace the cap, and store the glue in a cool spot.
7. Allow the parts to cure overnight.
FOR CLEANUP
1. For skin adhesion, first immerse the bonded surfaces in
warm, soapy water. Peel or roll the surfaces apart with
the aid of a blunt edge (spatula, teaspoon handle or
similar). Then remove the dried adhesive from the skin
with soapy water. Do not try to pull surfaces apart
with direct opposing action.
2. To remove from hard surfaces, saturate a soft cloth or
paper towel with the acetone and allow it to rest on the
spot for about 10 – 15 minutes.
After the Super Glue is removed, a white or light colored
spot may be left which is easily removed by applying
mineral oil or olive oil to the spot to restore the color.
3. Clean hands with Permatex brand hand cleaners.

TYPICAL CURING PERFORMANCE
Permatex Super Glue cures on exposure to moisture. Fixture
time is 15 – 30 seconds and full cure within 2 hours.
Temperature range -65F to +180F.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
an adhesive for chlorine or other strong oxidizing
materials.