Permatex Silicone Ceramic Extreme Brake Parts Lubricant
Permatex Silicone Ceramic Extreme Brake Parts Lubricant protect and lubricates every part of a brake assembly and prevents comebacks caused by irritating brake noise.
-Formulated to reduce brake noise, vibrations and harshness
-Dampens natural vibrating frequencies
-Treated with the latest, rust, oxidation and anti-wear additives
-Fortified with high concentration, high temperature, ceramic solids
-Stays in place, protects at extreme temperatures (-54F – over 3000F)
-Chemical and corrosion resistant
-Will not wash away
-Compatible with most plastics and rubbers used in Disc Brake Caliper systems
-Meets JIS K 2228 with EPDM and Nitrile rubbers
Suggested Applications: Sleeve, Outboard pad backing plate, Inboard pad backing plate, Caliper pins, Disc brake calipers, Caliper Pistons, Abutment clips.
Permatex Silicone Ceramic Extreme Brake Parts Lubricant is
an orange, non-melting, silicone-based lubricant formulated
with the latest rust, oxidation, and anti-wear additives to provide
long lasting protection against friction, wear, and corrosion.
Silicone Ceramic Extreme Brake Parts Lubricant is fortified with
a high concentration of a unique, high temperature ceramic
boundary lubricant that stay in place and protect at extreme
temperatures from -50F to +3000F (-46C to +1649C), while
providing protection against dirt, corrosion, and uneven pad
wear. This product was designed to be used on the backing
plates of friction pads and all brake hardware that needs
lubrication. It is compatible with internal and external brake
rubber and plastic hardware, including ethylene-propylene
• Wide temperature range
• Chemical resistant
• Prevents disc brake squealing and chattering
• Water proof; will not wash out
• Reduces wear
• Outperforms ordinary caliper greases and traditional disc
brake quiet products
• Silicone based formula
• Prevents rust and corrosion
• Lasts the life of the pads and shoes
• Long and short bolts
• Outboard pad backing plate
• Inboard pad backing plate
• Disc brake calipers
• Caliper pins
DIRECTIONS FOR USE
1. Wire brush the caliper housing and anchor plate to
remove all dirt and dust.
2. Clean all parts with Permatex Brake & Parts Cleaners.
3. Apply Permatex Silicone Ceramic Extreme Brake Parts
Lubricant to all moving caliper hardware, mating surfaces
and steel backing plates of the disc brake pads.
4. Lubricant may be applied to the BACKS of brake pads to
act as a noise suppressor eliminating caliper brake
squeal and chatter.
5. Any excess grease that squeezes out from the mating
surfaces should be removed.
Note: Keep lubricant off pads and rotors.
This product is not recommended for use in pure oxygen
and/or oxygen rich systems.
|Permatex Silicone Ceramic Extreme Brake Parts Lubricant Tds|