Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Product Details

Permatex Throttle Body, Carb & Choke Cleaner

OEM certified. A blend of solvents specifically formulated to dissolve and clean the residue deposited on carburetors and chokes during the normal operation of a motor vehicle or other gasoline engine-powered equipment. High pressure spray cuts and removes grease and varnish. VOC compliant in all 50 states. Oxygen sensor-safe. Improves engine performance.

Automobile

Suggested Applications: Manual and automatic chokes, baffle plates, air intakes, carburetors, linkages, throttle bodies, heat risers, and PCV valves.

Compare

Share this product

Description

PRODUCT DESCRIPTION
Permatex Throttle Body Carb & Choke Cleaner is a blend of
solvents specifically formulated to dissolve and clean the
residue deposited on carburetors and chokes during the normal
operation of a motor vehicle or other gasoline engine powered
equipment. VOC compliant in all 50 states.
PRODUCT BENEFITS
• Super jet spray cuts and removes grease and varnish
• OEM certified
• Oxygen sensor safe
• Improves engine performance
• VOC (50 state) compliant
TYPICAL APPLICATIONS
• Carburetors
• Throttle Bodies
• Manual and automatic chokes
• Linkages
• Heat risers
• PCV valves
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. Shut engine off.
3. Protect painted surfaces from overspray.
4. Shake can thoroughly before use. Note: There is no ball
agitator inside the can. For best results, aerosol can
should be at room temperature before spraying.
5. Holding can 8 to 10 inches from the surface for open area
cleaning, or 5 inches using the extension tube provided
for hard to reach areas, press the nozzle and discharge
the product on the assembly.
6. Carburetor: Spray carburetor inside and out covering all
parts. Repeat application if necessary.
7. Automatic Choke: Mark indicator plate before removing.
Spray directly into choke housing on spring and other
parts. Repeat application if necessary. Wipe dry.
Reinstall parts with indicator plate in original position.

For Cleanup
1. Clean hands with Permatex brand hand cleaners.

GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
for use with chlorine or other strong oxidizing materials.

TECHNICAL DOCUMENTS
Permatex Throttle Body, Carb & Choke Cleaner Tds

Reviews

There are no reviews yet.

Be the first to review “Permatex Throttle Body, Carb & Choke Cleaner”

Your email address will not be published. Required fields are marked *