Product Details
Weicon-Repair Stick Titanium
Description
- wear resistant
- titanium-filled
- high temperature resistant up to +280°C (+536°F)(briefly up to +300°C/+572°F)
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
KwikWeld™ Professional is a professional-sized version of our fast setting KwikWeld™ two-part epoxy cold weld system. It provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. KwikWeld™ cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300ºF.
WoodWeld™ is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! WoodWeld™ has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, WoodWeld™ cures to a light tan color.
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
SuperWeld™ is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator (6g size) allows for even surface application. The precision tip applicator on the 20g size allows for pin point surface application.
A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300°F intermittent. Over 3,000 PSI shear strength on steel.
Problem retrieving data from Twitter
Twitter error code: 215 - Bad Authentication data.
Please check the Twitter name in the widget or shortcode, Rotating Tweets settings or the Twitter API status.
Copyright © 2024 industrial-mall.com. All Rights Reserved.
Reviews
There are no reviews yet.