Description

PRODUCT DESCRIPTION 
Permatex Super Weatherstrip Adhesive is a viscous liquid
contact type cement for all types of weatherstripping and
general purpose bonding. Super Weatherstrip Adhesive is an
air-drying contact cement that allows quick bonding yet
maintains enough versatility in tack to allow large areas to be
spread and bonded at one time. The drying characteristics
allow for repositioning parts after contact is made. The
maximum strength of Super Weatherstrip Adhesive is attained
after all the solvent has been released. Non-porous surfaces,
if assembled while the adhesive is wet, will prevent the release
of solvent, consequently, the adhesive will take longer to dry
and develop maximum strength.
PRODUCT BENEFITS
• Water resistant
• Excellent chemical resistance
• Fast drying
• Withstands temperature extremes
TYPICAL APPLICATIONS
• Cut gaskets
• Carpeting, moldings
• Foam, vinyl, fabric-backed vinyl upholstery
• Headliners
DIRECTIONS FOR USE
1. Clean surfaces thoroughly. Use abrasives to remove
any powdery mold release from the new
weatherstripping.
2. Apply a thin, even film to both surfaces.
3. Allow to dry until the surfaces are tacky (about 3-4
minutes).
4. Bond the two surfaces together, and apply enough
pressure to produce uniform contact.
Note: The early strength of Super Weatherstrip
Adhesive is enough to hold most parts together.
However, maximum strength is obtained after the
adhesive is completely dry. Aging of the bond and
exposure to moderate heat increases strength.
For Cleanup
1. Use lacquer thinner or any hydrocarbon solvent while
still wet.