Description

PRODUCT DESCRIPTION
Permatex Large Diameter Threadlocker RED is a high
strength anaerobic threadlocking material that cures between
engaged threads to form a unitized assembly that resists
virtually all leakage, shock and vibration. The product is a
single component, anaerobic liquid that cures when confined
in the absence of air between close fitting metal surfaces.
Ideal for all 1 inch or larger diameter nut and bolt assemblies
where future disassembly is improbable. Excellent chemical
resistance with a temperature resistance range of -54C to
+149C (-65F to +300F). OEM Specified.
PRODUCT BENEFITS
Improved Reliability
Eliminates vibration issues
Seals against leakage
Prevents rusting of threads
Cures without cracking or shrinking
Easy Application
No mixing
No curing outside of joint
No torque compensation required during assembly
TYPICAL APPLICATIONS
Prevents loosening and leakage of threaded fasteners.
Particularly suitable for applications such as:
Frame brackets
Suspension fasteners
Shock absorber mounts
Wheel studs
Frame bolts
DIRECTIONS FOR USE
For assembly
1. Clean all threads (Bolt and Hole) with a cleaning solvent
such as Permatex Brake and Parts Cleaner and allow to
dry.
2. Determine if the threads to be bonded are Active or
Inactive Metals (Ref: Cure Speed vs. Substrate on the
second page). If material is an Inactive Metal, spray all
threads with Permatex Surface Prep (24163) and allow
30 seconds to dry. Priming is not required if the material
is an Active Metal. If unknown, its always best to use the
primer.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not
allow the tip to touch metal surfaces during application.