PATTEX WOOD CLASSIC GLUE

Description

Product features

Pattex Wood Classic glues together all types of wood, wood composites and even laminates. Great for all indoor projects. Water-based, solvent-free and really strong, Pattex Wood Classic gets the job done properly.

• High bonding strength
• Easy removal of adhesive residues

Possible uses

• For assembly bonding (dowel, tongue and groove, mortise and tenon)
• For gluing joints
• For surface bonding

Content

•   tin 1kg
•   bucket 3kg

 Storage

Protect from frost. Temperatures below +5°C to be avoided

Key Notes

• Allow glue crusts or dried-on glue residues to soak and swell for several days before removing them.
• Make sure to read the application and safety instructions given in our Technical Data Sheet and Safety Data Sheet.

Surface preparation

The surfaces to be joined must have good accuracy of fit and must be free of grease, load-bearing and clean.

Adhesive application

Apply a thin regular layer of WOOD GLUE Classic on one of the surfaces by brush or roller. For heavy wood,the glue should be applied on both surfaces. Join the two parts within the open time (approximately 15 minutes, depending on the temperature, humidity and type ofwood used). Press for 30 minutes, applying a pressure of 2 to 5 kg/cm². Pressing can either be hot or cold with the usual tools and appliances.

Application temperature

not below + 5° C (white point temperature)

Open time

max. 12 min. (at 20 °C), depending on room temperature, air humidity, wood moisture and amount of glue applied. Join the parts while the glue is still wet.

Consumption

Approx. 150 g/m², depending on the absorbency of the substrat