Product Details
Elmer’s Glue-All Multi-Purpose Glue, Gallon
- 1 gal
- Non-toxic
- Dries fast
- Multi-purpose
- For household repairs, craft projects and more
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
WEICON Gasket Maker is a strong and permanently elastic special sealant that cures with air humidity and practically without shrinkage. The Gasket Maker has a very good adhesion on steel, aluminium, glass, ceramic, and many other materials. It has an excellent temperature, oil and grease resistance, is pressure- and aging-resistant, UV-stable and permanently elastic. The special sealant can be used on engines and water pumps, gears and axles, oil sumps and in many other applications.
Permatex’s Black Plastic Welder™ forms a tough durable bond to hard and semi-flexible plastics, aluminum, fiberglass and more. This structural adhesive designed for general purpose bonding of a wide variety of materials. Black in color, ideal for automotive trim, bumper and clip needs.
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld™ sets to a hard, permanent bond.
WoodWeld™ is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! WoodWeld™ has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a tensile strength of 1800 PSI, WoodWeld™ cures to a light tan color.
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
Problem retrieving data from Twitter
Twitter error code: 215 - Bad Authentication data.
Please check the Twitter name in the widget or shortcode, Rotating Tweets settings or the Twitter API status.
Copyright © 2024 industrial-mall.com. All Rights Reserved.
Reviews
There are no reviews yet.