Product Details
Elmer’s Glue-All Multi-Purpose Glue, Gallon
- 1 gal
- Non-toxic
- Dries fast
- Multi-purpose
- For household repairs, craft projects and more
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
A two part, hand kneadable, putty type industrial strength Titanium-reinforced epoxy in stick form which is used to bond and repair metallic materials that will be exposed to high temperatures. Contrasting brown and white colored materials are mixed together to form a uniform golden brown titanium color to indicate thorough mixing. After 8 hours, High Temp™ can be drilled, sanded, threaded, machined or painted and it is resistant to water and most solvents. Permatex® High Temp™ does not bond to polyethylene and polypropylene and it is not intended for structural applications.
A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300°F intermittent. Over 3,000 PSI shear strength on steel.
WEICON Gasket Maker is a strong and permanently elastic special sealant that cures with air humidity and practically without shrinkage. The Gasket Maker has a very good adhesion on steel, aluminium, glass, ceramic, and many other materials. It has an excellent temperature, oil and grease resistance, is pressure- and aging-resistant, UV-stable and permanently elastic. The special sealant can be used on engines and water pumps, gears and axles, oil sumps and in many other applications.
KwikWeld™ is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. KwikWeld™ cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300ºF.
MarineWeld™ is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld™ sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters’ surface. MarineWeld™ has a 1:1 mixing ratio and
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
SuperWeld™ is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator (6g size) allows for even surface application. The precision tip applicator on the 20g size allows for pin point surface application.
Problem retrieving data from Twitter
Twitter error code: 215 - Bad Authentication data.
Please check the Twitter name in the widget or shortcode, Rotating Tweets settings or the Twitter API status.
Copyright © 2024 industrial-mall.com. All Rights Reserved.
Reviews
There are no reviews yet.