ABRO Epoxy Steel 4 Min Kwik-Set (MADE IN U.S.A) – 57 G

EPOXY Clear 4 MINUTE

KWIK-SET AUTOMOTIVE GRADE

• Non-Yellowing, Resists Water and Most Solvents

• Ideal for Automotive, Hobby or Home Use

FEATURES :

• Bonds: Aluminum, Steel, Brass, Bronze, Metal
• Tensile Strength:  3000 psi
• Color:  Gray
• Water Resistant
• Handling Time:  4 Minutes
• Set Time:  10 Minutes
• Cure Time:  24 Hours
• Temperature Range:  221˚F (continuous) -300˚F (intermittent)
• Non-Flammable
• Chemical Resistant: Most automotive fluids
• Part No.: 44209
• Package:  2 oz. (56.7g) tubes, carded
• Units Per Case:  12

TIPS & TRICKS :

• Equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly.
• Only mix the amount of hardener and resin that can be used within the handling time.
• Removable tape is good for putting on areas that you do not want epoxy to get on.  Before the epoxy cures, remove the tape.