Product Details
Weicon-Repair Stick Titanium
Description
- wear resistant
- titanium-filled
- high temperature resistant up to +280°C (+536°F)(briefly up to +300°C/+572°F)
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
Email: info@industrial-mall.com
Shipping To All Over Saudi Arabia
iconHotline:
TECHNICAL DOCUMENTS |
Weicon-Repair Stick Titanium TDS |
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld™ sets to a hard, permanent bond.
WEICON Gasket Maker is a strong and permanently elastic special sealant that cures with air humidity and practically without shrinkage. The Gasket Maker has a very good adhesion on steel, aluminium, glass, ceramic, and many other materials. It has an excellent temperature, oil and grease resistance, is pressure- and aging-resistant, UV-stable and permanently elastic. The special sealant can be used on engines and water pumps, gears and axles, oil sumps and in many other applications.
Permatex® General Purpose 1 Minute Gel Epoxy is a fast setting, two-part adhesive and filler system specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.
KwikWeld™ is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. KwikWeld™ cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300ºF.
A two part, hand kneadable, putty type industrial strength Titanium-reinforced epoxy in stick form which is used to bond and repair metallic materials that will be exposed to high temperatures. Contrasting brown and white colored materials are mixed together to form a uniform golden brown titanium color to indicate thorough mixing. After 8 hours, High Temp™ can be drilled, sanded, threaded, machined or painted and it is resistant to water and most solvents. Permatex® High Temp™ does not bond to polyethylene and polypropylene and it is not intended for structural applications.
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
J-B Weld™ is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.
Problem retrieving data from Twitter
Twitter error code: 215 - Bad Authentication data.
Please check the Twitter name in the widget or shortcode, Rotating Tweets settings or the Twitter API status.
Copyright © 2022 industrial-mall.com. All Rights Reserved.
Reviews
There are no reviews yet.