Product Details
Permatex Industrial Strength Cleaner & Degreaser
Carbon-Cutting Technology designed to completely remove tough carbon, oil and grease
- Carbon-Cutting Technology designed to completely remove tough carbon, oil and grease.
- Proprietary Corrosion Inhibiting Formula leaves behind a clean surface.
- Safe to use, non-flammable, biodegradable and VOC compliant.
- Free of petroleum solvents, fumes and acids.
For use on engines, transmissions, rear differentials, undercarriage, machinery, tools, workbenches, garage floors/walls, asphalt, stainless steel, chrome, and exhaust hoods.
Description
PRODUCT DESCRIPTION
PERMATEX Industrial Strength Cleaner & Degreaser is
formulated for heavy duty cleaning and degreasing jobs that
ordinary cleaners cannot handle. Permatex® Industrial Strength
Cleaner & Degreaser is a ready-to-use, water-based
composition of alkaline salts, powerful grease emulsifiers, and
grease cutting solvents. This cleaner cuts heavy grease and
soils quickly with no harsh fumes or unpleasant odors. It is
readily biodegradable according to OECD 301-C modified MITI
Test (I), contains no petroleum solvents or acids, and is nonflammable.
PRODUCT BENEFITS
• VOC compliant in all 50 states
• Special blend of surfactants, detergents and emulsifiers
• Water soluble solution
• Contains no petroleum based solvents
• Biodegradable
• No acids
• Non-flammable
• Non-combustible
• Non-abrasive
• Non-aerosol package eliminates product waste from
propellant depletion
TYPICAL APPLICATIONS
Applications
Machinery/equipment Walls
Exhaust filters Fiberglass
Cold engines Concrete
Wax remover Carpets
Exterior siding Molds
Tooling/tools Tanks
Shop floors Janitorial cleaning
Substances (Soils) Removed
Grease & grime Lubricants Oil deposits
Tar Food stains Wax
Ink Dirt/mud Smoke and soot
DIRECTIONS FOR USE
NOTE: Some surfaces such as aluminum alloys, plastic or
painted surfaces are inherently sensitive to alkaline
cleaners. Spot test on ALL surfaces before use. Do not use
on glass. Use with adequate ventilation. Do not inhale mist.
The use of safety glasses and rubber gloves is recommended.
These directions must be followed or damage may result.
1. Before degreasing, be sure that all surfaces are cool to
the touch. Do not apply in direct sunlight or if air
temperature is above 100F.
2. Apply Industrial Strength Cleaner and Degreaser in full
strength onto the cool, pre-tested surface to be
degreased.
3. Allow cleaner to penetrate the soil. NEVER allow
cleaner to dry on any surface. Stubborn soils may
require brushing or a second application.
4. Immediately rinse with water until no sudsing is
noticeable.
| TECHNICAL DOCUMENTS |
| Permatex Industrial Strength Cleaner & Degreaser Tds |
Reviews
There are no reviews yet.