Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Email: info@industrial-mall.com

Shipping To All Over Saudi Arabia

iconHotline: 

Product Details

Description

OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids

Automobile

Valve covers, oil pans, timing covers, water pumps, thermostat housings

DIRECTIONS:

  1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner.
  2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16” to 1/4” bead.
  3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
  4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions.
  5. Clean uncured silicone from hands, tools and clothing with Fast Orange® Hand Cleaner.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

TECHNICAL DOCUMENTS
Permatex High-Temp Red RTV Silicone Gasket Maker TDS

Reviews

There are no reviews yet.

Be the first to review “Permatex High-Temp Red RTV Silicone Gasket Maker 26C – 311g”

Your email address will not be published. Required fields are marked *